A
-
Abdul-Ameer, Yasir Ahmed
Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
-
Abrinia, Karen
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Aghaei, Elahe
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
-
Ailawalia, Praveen
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
-
Alavi, Sayed Ehsan
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
Ali Al-Saif, Abdul-Sattar Jaber
Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
-
Alkasasbeh, Hamzeh Taha
Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
-
Alnefaie, Khadijah M.
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
-
Al-Raezah, Ahlam A.
A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
-
Asemi, Kamran
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Azizi, Alireza
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
B
-
Babaei, Masoud
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Babaei, Masoud
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
Babaei, Masoud
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
Babu, NVN
Convective MHD Jeffrey Fluid Flow Due to Vertical Plates with Pulsed Fluid Suction: Numerical study [Volume 54, Issue 1, 2023, Pages 36-48]
-
Bakhtiari, Farnaz
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Bavarsad Salehpour, Iman
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
C
-
Codarcea-Munteanu, Lavinia
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
D
-
Dashtbayazi, M.R.
The couple stress analysis of Timoshenko micro-beams based on new considerations [Volume 54, Issue 1, 2023, Pages 19-35]
-
David Nwa-David, Chidobere
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Dibajian, Seyed Houssein
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Dimitri, Rossana
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
E
-
Edozie Okeke, Thompson
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Elkhalfi, Ahmed
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
-
Esmaeili, Ali
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
F
-
Faisal Waqar, Muhammad
Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
-
Farazin, Ashkan
Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
-
Fatahi, Laleh
Sensitivity Analysis of the Finite Element Model of the Foot and Ankle Complex for Vibration Analysis [Volume 54, Issue 1, 2023, Pages 140-149]
G
-
G, Murali
Convective MHD Jeffrey Fluid Flow Due to Vertical Plates with Pulsed Fluid Suction: Numerical study [Volume 54, Issue 1, 2023, Pages 36-48]
-
Geetha, N. K
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Ghafoorian, Farzad
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Ghannad, Mehdi
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Ghasemi, Amir Hossein
Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
-
Golbakhshi, Hossein
The couple stress analysis of Timoshenko micro-beams based on new considerations [Volume 54, Issue 1, 2023, Pages 19-35]
H
-
Hajivand Dastgerdi, Rashid
Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
-
Hansora, Ashwinkumar Ghanshyambahi
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Hasan, Maysoon H.
Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
-
He, JI-Huan
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
Heidarpour, Behzad
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Hinis, M. Ali
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Hosseini, Mohammad
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Hosseini, Mohammad
Stability analysis of conveying-nanofluid functionally graded nanotube based on nonlocal couple stress theory [Volume 54, Issue 2, 2023, Pages 309-322]
-
Hosseini, Rouhollah
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
Hosseini, Rouhollah
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
I
-
Ike, Charles Chinwuba
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
J
-
Jafari, Mohammad
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
J. Ali Al-Saif, Abdul-Sattar
Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
K
-
Kazemi, Amin
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Khatoonabadi, Mojtaba
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Kiarasi, Faraz
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Koli, Chandu M
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
-
Koochak Tondro, Mohammad
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
L
-
Luminita Scutaru, Maria
Symmetrical Mechanical System Properties-Based Forced Vibration Analysis [Volume 54, Issue 4, 2023, Pages 501-514]
M
-
Mahdavi Adeli, Mohsen
Pull-in behaviour of a micro switch actuated by the electrostatic under a uniform longitudinal magnetic field based on nonlocal couple stress theory [Volume 54, Issue 4, 2023, Pages 577-587]
-
Mahmoudi, Rouzbeh
Pull-in behaviour of a micro switch actuated by the electrostatic under a uniform longitudinal magnetic field based on nonlocal couple stress theory [Volume 54, Issue 4, 2023, Pages 577-587]
-
Mahnama, Maryam
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Maleki, Mohsen
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Malinowska, Agnieszka
Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
-
Marin, Marin
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
Marin, Marin
Symmetrical Mechanical System Properties-Based Forced Vibration Analysis [Volume 54, Issue 4, 2023, Pages 501-514]
-
Marin, Marin
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
-
Mehrpooya, Mehdi
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Merkani, Mohammad Soroush
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Miralaei, Nasim
Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
-
Mirmotahari, Seyed Reza
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Mohammadi, Mojtaba
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Mohseni, Elham
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Momen, Roya
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Moori Shirbani, Meisam
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
N
-
Nabgan, Mohammadhossein
Sensitivity Analysis of the Finite Element Model of the Foot and Ankle Complex for Vibration Analysis [Volume 54, Issue 1, 2023, Pages 140-149]
-
Nadaf Oskouei, Alireza
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
Naddaf Oskouei, Alireza
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
Naderi, Abusaleh
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Nagaraju, S
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Nejad, Mohammad Zamani
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Nikkhoo, Amirfarhang
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Norouzi Farahani, Erfan
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Nwa-David, Chidobere David
Static Bending Solutions for an Isotropic Rectangular Clamped/Simply Supported Plates Using 3-D Plate Theory [Volume 54, Issue 1, 2023, Pages 1-18]
O
-
Okwudili Mama, Benjamin
Static Bending Solutions for an Isotropic Rectangular Clamped/Simply Supported Plates Using 3-D Plate Theory [Volume 54, Issue 1, 2023, Pages 1-18]
-
Okwudili Mama, Benjamin
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Onyeka, Festus Chukwudi
Static Bending Solutions for an Isotropic Rectangular Clamped/Simply Supported Plates Using 3-D Plate Theory [Volume 54, Issue 1, 2023, Pages 1-18]
-
Onyeka, Festus Chukwudi
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
P
-
P, Bridjesh
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Pan, Anqiang
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Patel, Harshvadan S
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
R
-
Rafeeyan, Mansour
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Rahi, Abbas
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Rajabi, Majid
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Ramezani, Fatemeh
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Ramroodi, Niloofar
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Ravikiran, Ch
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Reedy, G Chandra Mohana
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Rezaeipour, Abolfazl
Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
-
Rohani Bastami, Abbas
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Roohi, Reza
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
S
-
Saeed, Tariq
A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
-
Saeed, Tariq
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
-
Saidi, Ali Reza
The couple stress analysis of Timoshenko micro-beams based on new considerations [Volume 54, Issue 1, 2023, Pages 19-35]
-
Salunkhe, S.N.
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
-
Shafaatian, Seyed Mehdi
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Shahravi, Morteza
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Shahrokhi, Mahmoud
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
-
Soleimani, Ahmad
Stability analysis of conveying-nanofluid functionally graded nanotube based on nonlocal couple stress theory [Volume 54, Issue 2, 2023, Pages 309-322]
-
Soleimani, Ahmad
Pull-in behaviour of a micro switch actuated by the electrostatic under a uniform longitudinal magnetic field based on nonlocal couple stress theory [Volume 54, Issue 4, 2023, Pages 577-587]
-
Soltani, Azadeh
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
-
Soltani, Masoumeh
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
T
-
Tantawy, Rania M.
Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
-
Tornabene, Francesco
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
V
-
Vlase, Sorin
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
Vlase, Sorin
Symmetrical Mechanical System Properties-Based Forced Vibration Analysis [Volume 54, Issue 4, 2023, Pages 501-514]
-
Vlase, Sorin
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
W
-
Wu, Yue
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
Y
-
Yarar, Alpaslan
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Yarbasi Kayhanlar, G. Elif
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Yildiz, Ali
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Yvaz, A
Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
Z
-
Zenkour, Ashraf M.
A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
-
Zenkour, Ashraf M.
Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
-
Zenkour, Ashraf M.
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
Your query does not match with any item